How to Screw and Drill into Concrete without Hammer Drill?

drilling into concrete without a hammer drill

Working with tools and managing them is not easy. It often happens that you are all set for a project, arranged your tool kit, but you forgot one of the vital tools required for a specific task. If you are assigned for a big home project that requires a lot of drilling into concrete, however, you don’t have a hammer drill, what will you do now?

Out of the things you do, do not panic. Because you can easily do drilling into concrete without a hammer drill. You have other alternatives for that like, a regular drill with a wide range of masonry drill bits. In this article, we will go through the basic tips, and steps to solve this common issue.

Let us start by understanding what we are dealing with here to apply the right techniques.

Concrete Bricks:

Concrete bricks are sand, which is firmly stuck together. It is tightly packed, due to which it’s not easy to create a hole inside it without a proper tool. For the fact that concrete requires a special kind of drill.

We mostly use a hammer drill for it, but you can use some other alternatives if it’s not available.

Use of Masonry and Concrete Drill bits:

Masonry drill bits are the best bit for drilling into concrete. Because using them results in less damage and breakdown. These bits usually come with thicker tips made up of heavy-duty material such as tungsten carbide.

Nevertheless, in every home project, we most commonly use the cordless drill as its working revolves around how to screw into concrete and drill new holes. Remember, when it comes to heavy-duty materials like drilling into bricks and cement your regular drill might not be very useful.

Therefore, the hammer drill is designed to drill into the heavy-duty materials like cement, stucco, concrete, and cement.

By using a hammer drill, you can quickly drill into everything. As it not only provides rotational support but also hammers down the screw into the concrete. Note that when you are using a hammer drill, it forces the bit into the concrete with speed and pressure that results in an ideal hole.

Is it possible to have a perfect hole in concrete without a hammer drill?

Undoubtedly hammer drill is famous for this work but if you do not have it, it doesn’t matter because there is another regular drill that we can use.

Drilling into the concrete is possible if you have a regular drill, but it will not help you on its own. Along with it, you will require some other essentials like drill bits, nails, time, and dedication.

drills concrete

5 Step for Drilling into Concrete without a Hammer Drill

If you are worried about drilling into stucco, cement, brick, and concrete without a hammer drill, follow the steps below to solve the problem without getting any external help:

1. Get different sizes of masonry drill bits:

While working with a regular drill, you will need masonry brick drill bits. As it will help you with penetrating the concrete. Start with smaller bits as you work your way up.

2. Mark the location of the holes:

concrete screws no pre drilling

After getting the bits, now mark the position of the holes at the point where you want to drill. While you are marking the hole, keep these three-pointers in mind: size, position, and depth of the hole to be drilled.

In addition to that, use some tape or a pencil to mark the accurate position of the hole. Note the dimensions of the whole too. To be precise, use TV mounting brackets to understand the accuracy of the holes.

3. Use your protection kit equipment:

Before drilling into concrete, wear goggles, an N95 respirator, and hearing protection as safety is the priority. Since the dust coming from the concrete has hazardous materials.

N95 respirator will filter the 95% airborne particles. It will save you from lung problems. Furthermore, if you are using a ladder, use the one with firm steps.

Also, stand in a comfortable position from where you can easily apply force.

4. Keep lifting the drill out of the hole:

When you are creating a hole, keep lifting your drill forward and backwards. By doing this, you will remove the excessive dust from the hole. It will not only clear the dust and debris, but the drill will function smoothly as well.

5. Install the Wall Anchor:  screw into concrete

Once you have successfully drilled the holes. It’s time to slot the wall anchors to support the items’ weight. Please make sure you attach them properly to ensure longevity.

Note that these steps are to help you in understanding how to screw into the concrete without a hammer drill. However, in order to get the desired results to read the steps again to ensure you understood everything.

Check out the Crack stix review if you ever have to deal with cracks in concrete. 

Techniques for drilling into concrete without a hammer drill

Follow the easy to use technique and get the work done in less time.

1. Initiate drilling with a small masonry bit:

Start by positioning your drill perpendicularly with the brick wall and work with a low speed. Secondly, hold the drill with two hands to keep your one hand on the pistol for grip and the other on the auxiliary handle. Make sure that you are holding the drill accurately; otherwise, you can cause damage inside the wall.

Set the drill at slow speed and choose a smaller and sharper tip of the masonry bit. Keeping the drill slow will create fine holes and prevent the drill from getting too hot. Moreover, if you have a drill with a single speed, try drilling in short bursts to avoid overheating.

2. Use water and lubricant for overheating:

how to screw into concrete without a hammer drill

As we are using a regular drill as a substitute for a hammer drill. Keep in mind that it gets hot very quickly due to the friction process of continuous rotational against the brick. It simply means that without the hammering action of the drill, masonry and concrete drill gets heated often.

Therefore, excessive and continuous heat and friction will directly affect the masonry bits. The worst that could happen is the drill may lose its original shape. Also if bits get overly heated, they will not remain stronger and last longer.

To avoid such circumstances add lubricant or water to the drill, bit, and hole frequently to solve this issue. It will help you with overheating and maintain the temperature. However, if you feel that the motor of the drill is sputtering, apply water to it immediately.

3. Shift to large size masonry bits:

Now that you have created the starter holes with the small size drill bits. It’s time to switch and start using the larger size masonry drill bits. You can try expanding the size of the holes with these bits.

Consequently how you are going to use the hole is important. Suppose if you plant a bolt to hold something in its place, make sure the item’s weight. By doing that, you will know the length and size of the hole.

4. Scour the blockages:

Sometimes, while drilling, the masonry bit stops and does not go any further because of the blockages. In a situation like this, when you are stuck, halt the drilling. Instead, use a hammer and nails to break the blockage or smash it.

Once the surface is smooth and blockage free, try drilling again.

These techniques will help you with drilling into concrete without a hammer drill. By using these, you will be able to drill into brick and concrete effectively without causing any damages. Likewise, you can either buy it or rent it depending upon the length of the project.

For the top 9 Concrete Fillers, click right here

Best Tool for screwing into the concrete:

Although a regular drill is a good alternative, it can still never replace the hammer drill’s functions and features. Because a hammer drill is specifically designed for drilling into the concrete. It will give you the best results.

how to attach to concrete wall without drilling

You don’t need to put extra effort into the hammer drill. Also, it’s safe, and it doesn’t get overheated often like a regular drill. For hammer drill screwing inside the concrete and brick is not a big deal. Furthermore, you do not even require several bits.

It is the best option when it comes to drilling into the concrete. So if you run into a project involving a lot of concrete drilling, try getting a hammer drill. As it will not save your time but will also save you from big troubles.


If you are doing a project involving a lot of drilling, without having proper tools there is a fair chance of damaging it. It is the best time to be creative and save money.

Therefore, in such a situation a regular drill comes in handy and helps you out. However remember that the results might not be as you expect from hammer drills, but it works pretty effectively.

The regular drill doesn’t have as many features as a hammer drill; that’s why it’s a little challenging to work with. But if you have other tools like a masonry drill bit, cement drill bit, and concrete drill bit, you can easily manage to drill holes inside the concrete. From my experience, I would highly recommend you to be as attentive as you can to get significant results.

Leave a Comment

Your email address will not be published.